Thursday, 23 January 2014

CONFIGURE BSNL EVDO ON SIERRA 598U AND 595U modems

The difference b/n sierra 595u and 598u is 595u requires battery while 598u do not require battery.Performance wise both are mostly same.So it is better to buy 598U than 595U

TOOLS NEEDED
2.Sierra esn flasher https://app.box.com/s/uldzd9k1yl7gty9ojgimtju9wd0xa331
3.Bsnl Evdo prl File-https://www.dropbox.com/s/c98wzvh6dd1bski/a2%20-%20Copy.prl
It is an esn flasher tool for sierra to flash esn of ruim
Firstly you need any zte modem having ruim support to read data of bsnl evdo ruim using DFS ,then save the snapshots of programming tab.Follow these steps carefully
1.Connect your sierra modem to DM port using DFS CDMA tool
2.Send spc 000000
3.Then go to programming tab then go to NAM tab.
4.Press read tab below SID AND NID.Now copy all things carefully except SID and NID to your Nam tab
5.Now open your DFS snapshot of NAM tab then write only MIN A,MIN D,MDN AND PCS will be same that is your mobile number to your NAM tab.Write SID and NID from your snapshot like I have written 14518 and 65535 in my tab.
6.Make all preferred settings as in image below.Home page,origin,roam as V13K
7.Now click write,then click on reset button.
8.Close DFS and Open again then follow steps 1 to 3.
9In NAM tab you can see PRL. Click read writen below prl.
10.Click on load prl then choose the prl file you have downloaded.Check enabled then click write.then again reset
11.Follow step 8.





 12.Now go to Data tab then click on read then IN each field PAP,PPP,HDR,etc use 9181XXXXXX@AAAXX.IN as UID ,9181XXXXXX as password and  same MODE settings as in image below.Check all boxes in data config,active config and evdo scp as on image below.The 9181XXXXXX will be same as you have written in min field.In AAAXX,the XX will be KO,ND,etc depending on your location.To know it see your RUIM snapshot page 
13.Now click on write then reset 
14.Now again follow step 8

15.Now go to mobile IP tab.Then click on read then copy each field as on image below.NAI will be as same that is on Last step.then click write then reset it 

16.Now open your snapshot of General tab,you will see ESN on esn tab which is a hexadecimal code.Now connect your modem open Sierra cdma esn flasher.then flash the ESN on it.
18.Download watcher for sierra 598u or 595u then it will work
If you facing any other problems then go to this link click here

For BSNL 3G 1099 plan details,Click on the link below
http://bsnlevdoprithvi.blogspot.in/2016/10/bsnl-3g-1099-truly-unlimited-plan-review.html



Posted by at

62 comments:

  1. akash7719 June 2014 at 22:06

    will this work on prithvi ue100?
    if not then how to make sim from the ue100 work on any other 1xEV-DO modems?
    plz reply asap!

    ReplyDelete
    Replies
    1. Unknown21 January 2016 at 00:30

      yes I made it work myself, you just need a zte modem just to enter other info and you can use its imei no. in place of ESN and if you want your 9181XXXXXX this no. its on the back side of your sim. A long serial no.is given. all you need to do is use its alst 10 digits as phone no.

      Delete
  2. Unknown20 June 2014 at 01:19

    No it will not work with ue100.Sim will work on some zte and Huawei modem but only on 1x mode by changing settings using dfs tool.Among them only few support support evdo mode.

    ReplyDelete
  3. akash7720 June 2014 at 07:51

    plz explain the process in detail and recommend an evdo dongle.. The 1x speed isnt good...

    ReplyDelete
    Replies
    1. Unknown20 June 2014 at 22:48

      Sierra modem will be good.Otherwise mts 2766 modem also works fine

      Delete
  4. PRAKASH20 June 2014 at 10:23

    ir,

    I have both the devices since 1 year.However I am not able to transfer the sim data from prithvi to Sierra.Kindly help me in this regard.I read your blog but still couldn't do it.

    I will send both the devices through courier.Can you please help me in this regard .



    Surya prakash
    prakash.vankina@gmail.com

    ReplyDelete
  5. Unknown20 June 2014 at 22:55

    You should have zte modem or Huawei modem with sim port so that you can read the data.Write down data in a paper piece. The main things are esn number,9181XXXXXX,that you should write on paper piece.Evdo prl file and esn flasher download link are available on blog

    ReplyDelete
  6. Silent Rider3 July 2014 at 14:33

    My UE100 died today
    Can you please sugfest a new data card for my bsnl evdo sim?

    Good signal reception and online availability are my only requirements
    Thanks in advance

    ReplyDelete
    Replies
    1. Unknown4 July 2014 at 06:28

      It will be hard to find any cdma dongle that work with bsnl evdo sim.Try searching over internet.Otherwise there are some zte modems that may work.

      Delete
  7. Geek23 July 2014 at 05:56

    I tried your method but unsuccessful so I copied the same settings from my Zte AC8700 and that didn't work too so I went to the local Bsnl office but their PC was not working so they gave me settings and prl file but still not working. Can you help pls? The problem is it doesn't accept my username and pass it reverts back to the default US user username. And the screen is somewhat different from your screen too.

    ReplyDelete
    Replies
    1. Unknown23 July 2014 at 06:18

      Have you entered correct SPC code??

      Delete
    2. Unknown21 January 2016 at 00:32

      use 000000 as spc code and 563085992436B40A as password

      Delete
  8. विभावरी रंजन10 August 2014 at 23:35

    Admin,
    i am using Haire E18 Wifi dongle but not satisfied can you please suggest me a better option?

    thanks in advance

    ReplyDelete
    Replies
    1. Unknown12 August 2014 at 18:34

      You can use sierra 598u coz it has antenna port too

      Delete
  9. Unknown12 September 2014 at 12:49

    Hi Anurag I have got one 598u I configured it but at the final step whenever I open ESN flasher it says sierraCDMA.exe has stopped working. I have also tried in compatibility mode but no success. Plz help.

    ReplyDelete
  10. Unknown13 September 2014 at 02:38

    There is no error in application.May be there is a problem in your windows.Try flashing with other pc it will work.Make sure that you run application in administrator mode.

    ReplyDelete
    Replies
    1. Unknown21 January 2016 at 00:33

      ESN flasher only working in 32 bit pc not 64 bit pc

      Delete
  11. Unknown13 September 2014 at 18:55

    can you help me with remote desktop just to check the settings I've made from cdma tool

    ReplyDelete
    Replies
    1. Unknown16 September 2014 at 06:56

      Is it still not working??.Have you tried it on diffrent pc.

      Delete
  12. Unknown16 September 2014 at 20:07

    thanks for response.I was out of station I will try it today.

    ReplyDelete
  13. Unknown16 September 2014 at 23:08

    It worked on different pc but do you want me to flash my esn to same as my zte usb dongle

    ReplyDelete
  14. Unknown17 September 2014 at 04:33

    its wierd I'm not getting any signal but I've recieved messages from bsnl for data used on my zte modem

    ReplyDelete
  15. Unknown17 September 2014 at 07:18

    I figured everything out and happy to post this comment with the help of sprint 598u.
    Thank you.

    ReplyDelete
  16. Unknown29 October 2014 at 09:08

    Im having tata photon plus. I have successfully unlocked it. I am able to use BSNL EVDO with sim & able to use tata photon without sim. But whenever I connect Bsnl evdo with sim, it connects 1xCDMA network. I came to know from your post, I need to update BSNL PRL file. My question is once I update BSNL PRL file, my existing TATA photon PRL file will be replaced or updated with new one. Will I get same speed in tata photon after bsnl prl file update?

    Please help me.

    ReplyDelete
    Replies
    1. Unknown29 October 2014 at 13:16

      only 1x works with photon plus devices

      Delete
    2. Unknown30 October 2014 at 02:31

      Thanks for your reply. Can you more elaborate, please? You mean once I update BSNL PRL file. I will get 1x speed when I connect Tata photon tower?

      Delete
    3. Unknown30 October 2014 at 07:39

      No I am saying that in the photon devices that I have used the settings are reverted back.That is it will not work with bsnl evdo mode.It will give you photon plus speeds normally

      Delete
    4. Unknown5 November 2014 at 01:36

      Got it.. Thanks for your reply Anurag..

      Delete
  17. Rasik Wagh22 September 2015 at 05:24

    This comment has been removed by the author.

    ReplyDelete
  18. Rasik Wagh22 September 2015 at 20:16

    This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Unknown23 September 2015 at 02:18

      You are getting this error because you have entered incorrect spc value.To get spc value follow this link
      https://m.youtube.com/watch?v=wujUuUeJATM

      Delete
    2. Rasik Wagh23 September 2015 at 20:31

      This comment has been removed by the author.

      Delete
    3. Unknown25 September 2015 at 13:51

      tell me the dongle's model name

      Delete
    4. Rasik Wagh25 September 2015 at 22:41

      This comment has been removed by the author.

      Delete
    5. Rasik Wagh26 September 2015 at 00:24

      This comment has been removed by the author.

      Delete
    6. Unknown26 September 2015 at 01:52

      Run SierraCdma.exe using administrative prompt in your pc then flash it. If you are still unable to flash it then try it with other pc(your freind) running on Windows 7...

      Delete
  19. Rasik Wagh25 September 2015 at 22:39

    This comment has been removed by the author.

    ReplyDelete
  20. Rasik Wagh26 September 2015 at 02:56

    this man rocks... everything described in this blog is very effective.. thank u.. 👍

    ReplyDelete
  21. Devil23 November 2015 at 12:05

    so this modem supports both evdo and 1X. Am I correct?
    also, where can you buy it in india?

    ReplyDelete
    Replies
    1. Unknown26 November 2015 at 08:26

      Yes this support both, You can buy it from ebay and also look at site techenclave.com, here also you will get unlocked modem.

      Delete
  22. Unknown27 December 2015 at 18:46

    i got bsnl cdma ruim and a sierra 598 modem. But i do not have any zte modem which support ruim. is there any way to configure my modem ?

    ReplyDelete
  23. Murali Dharan4 January 2016 at 00:13

    Thanks OP for a good post. The flasher link is dead, can you please update it.
    I have everything else. Hope to get this working ASAP. Sipping data at 50 damned KBps!

    ReplyDelete
  24. Unknown21 January 2016 at 00:25

    Hi Anurag,
    Its a long time I m using sprint sierra 598u modem for bsnl evdo and getting whopping 250-300+ kbps download speed compared to crappy zte ac 8700 which gave 80-100kbps max. your blog was great help. I want one more help that if you can tell me any wifi router I can use with my 598u.

    ReplyDelete
  25. Unknown21 January 2016 at 21:46

    I am using Iball 3g+ wireless n router since 2 years with the sierra 598u....It is working fine without any issues.

    ReplyDelete
    Replies
    1. Unknown21 January 2016 at 23:30

      Is it good enough, its range and all or any other drawbacks or if you know can you suggest me any other router like tp-link

      Delete
  26. Unknown21 January 2016 at 23:37

    also is it just plug and play with sierra 598u or need to be configured?

    ReplyDelete
    Replies
    1. Unknown22 January 2016 at 09:38

      I don't know any other router. You can check other router's too, but before buying that check the compatibility list....otherwise go for Iball router, it is very good...and yes you need to do minor configuration like username, password and network type only..its very easy

      Delete
    2. Unknown31 January 2016 at 08:02

      I bought TP-LINK MR3020. It is compatible with 598u but I m facing problem in configuring it. Can you please help. I can send you image of what fields are required.

      https://onedrive.live.com/redir?resid=DA5CFF50F3BAA35!5482&authkey=!AKx9bpCsa-IDyLc&v=3&ithint=photo%2cpng

      Delete
    3. Unknown31 January 2016 at 08:04

      I think its same as your iball router settings; can you plz give it a try

      Delete
    4. admin1 February 2016 at 08:23

      I'm using MR3020
      http://postimg.org/image/xc8fuzwlz/

      Delete
  27. admin25 January 2016 at 09:36

    This comment has been removed by the author.

    ReplyDelete
  28. admin25 January 2016 at 22:47

    Do we need to purchase unlocked sierra 598 ?
    can i get http://www.ebay.com/itm/sierra-wireless-usb-598-broadband-usb-modem-/161939992545?ssPageName=ADME:X:RTQ:US:1123

    ReplyDelete
    Replies
    1. Unknown26 January 2016 at 07:18

      You need to purchase unlocked one...this is not unlocked

      Delete
    2. admin1 February 2016 at 08:34

      can i buy AC2766 to read sim data ?

      Delete
    3. Unknown6 February 2016 at 11:31

      Yes...but you can borrow any old tata photon+ ZTE modem with your freind too

      Delete
    4. admin9 March 2016 at 00:17

      Thanks for the reply..finally got tata photon +

      Delete
  29. admin6 February 2016 at 20:33

    I have ec1260 but I don't know whetether it is unlocked or not. Can I use this or device needs to be unlocked

    ReplyDelete
  30. admin9 March 2016 at 00:16

    How to unlock sierra 598u?

    ReplyDelete
    Replies
    1. Unknown9 March 2016 at 00:33

      search for cracked firmware for sierra 598u on internet,then flash it.Go for this link
      https://www.techenclave.com/community/threads/need-help-to-configure-sierra-598u-on-bsnl-evdo-urgent.167588/ it may help you

      Delete
  31. vahid30 June 2016 at 04:49

    How to change the fimrware of ec122?

    ReplyDelete
  32. Admin25 June 2017 at 19:32

    Today i buy a new connection of bsnl evdo prepaid cdma sim anyone please tell me on 2017 what download and upload speed in odisha or in ur state and city. I think i recharge a small plan of Rs.55 if it give me agood speed then i thing for unlimited plan. http://hdfree4u.com/

    ReplyDelete

Subscribe to: Post Comments (Atom)